Operational Defect Database
BugZero found this defect 2993 days ago.
Data sources
All data on this page is proprietary to BugZero® or gathered from public sources
WatchGuard Technologies | kA10H000000g3hESAQ
Multi-WAN configuration check boxes for an external interface are cleared when interface name changes
Last update date:
6/24/2016
Affected products:
Firebox M200
Firebox M300
Firebox M270
Firebox M370
Firebox M470
Firebox M570
Firebox M670
Firebox M290
Firebox M390
Firebox M400
Firebox M500
Firebox M440
Affected releases:
All
Fireware
11.x
11.10.x
11.10
11.10.1
11.10.2
11.10.3
11.10.4
11.10.5
11.10.6
11.10.7
Fixed releases:
All
Description:
Issue
If you change the name of an external interface, the check box for that interface is cleared in the Multi-WAN configuration. If you had only two external interfaces configured, you will see a prompt when you exit the Network Configuration menu asking you to select the interfaces to use for Multi-WAN. If you have more than two external interfaces configured, there is no prompt. If there is no prompt and you do not re-select the external interface for multi-WAN before you save your configuration to the Firebox, the interface is removed from outbound multi-WAN participation.
Workaround/Solution
After you change the name of the external interface, select the check box for the interface again in the Multi-WAN configuration.
